Rugby: low kick

Kicking from hands requires the player to kick the ball before it bounces, unlike a drop kick. 1 ball, cones to give areas for scoring games etc.

The aim of the drill improve Height and accuracy of the kick.

Game to practice controlling the ball.Set up two goals (roughly 2m wide) opposite each other about 5m away (red cones - see digram).Each player has to defend their goal while the other player tries to score by grubber kicking the ball through the goal. The player in goal tries to gather the ball, and then kick it back to try and score.PROGRESSIONS:Pass the ball instead of grubber kicking it. Make the passes low and difficult to catchMake the goals wider so there is more space to defendThe player in goal should face away from the player with the ball, when the player with the ball shouts the goal-keeper must turn around and try to defend their goal.

This is the third exercise in a series of three that can be put together to form a contact conditioning circuit. The circuit can be sets of 30 seconds of hard work followed by 30 seconds of rest. Swap in this circuit for your usual fitness routine to give the players something a bit more interesting and transferable to a game. Alternatively, this would be a great exercise to include as part of a warm up.Players work in pairs, one player holds a tackle bag behind a tackle sausage.The other player makes a low tackle on the sausage and then drives through, clearing out the player holding the tackle bag.This player then goes to ground and gets back up to complete another repetition in the other direction.It is the job of the player holding the tackle bag to lift up the tackle sausage after each repetition.This drill will increase players overall fitness levels while being very relevant to game situations. 0.21 - Why is this important for players?

The box kick is a very dangerous tactic for attack and defense. When attacking it can apply immense pressure on a team by putting the ball behind them. It also isolates the receiver making them vulnerable to turnover. It can also be dangerous if not executed correctly as you can end up giving away possession.

Drill to practice catching high kicks.Set up a grid roughly 15m long and 10m wide.Get a line of players on one side of the grid, and a coach or kicker on the other side.The coach kicks the ball high into the air, the player at the front of the line runs into the grid and tries to catch the kick. Once they have caught the kick they pass the ball back to the coach and join the back of the line.The coach then kicks the ball for the next player in line to catch.PROGRESSION:Encourage players to jump as they catch the ballAdd in a defender to put pressure on the player catching the ball.

Make sure that your players are holding their tackle shields correctly! Have your players work in groups of 10, adjust depending on your own training goals. Have more than one activity area in order to keep your players moving, standing around watching is not training. If you find that you don't have enough equipment, then have the other groups undertake a different activity. Keep your activity briefing, brief. Give 8 players a tackle shield each, they should form a circle, with around a meter of space (or less) between shields. 2 players in the middle, one of the player with a ball. The ball carrier has to run into contact with one of the outside player and turn to give the ball to the 2nd player in the middle who has to provide close support. On being given the ball the new ball carrier has to run into contact with another player holding a shield, the previous ball carrier is now the support player. The two players in the middle must operate at a high tempo for a preset period of time as defined by the coach. Players can rip and roll, provide and take a pop, provide and take a pass, fall and present, fall and pop, and drive and present on their hip. Contact should last no more than three seconds, keep the tempo high! Change the players in the middle of the circle.

Drill to improve players taking the ball into contact and ruck clear out.Set up a square roughly 5m x 5m. Get two lines of players behind two of the cones with a ball on one side. Get a defender to stand with a hit shield towards the edge of the square where the players are lined up.The player behind the red cone runs around the opposite red cone, when he enters the square the player behind the green cone passes him the ball and then runs around the opposite green cone to support him. When the player receives the pass he continues running and hits the hit shield, before going to ground and presenting the ball. The support player comes in and clears out the defender with the hit shield.The players then swap lines and the ball is passed to the front of the line behind the green cones for the drill to continue.

Break your players into two teams. One team goes to attack, and one to defence. There is no kicking in this game. Normal laws of rugby do not apply e.g. the ball can be passed in any direction. The ball is passed from player to player, but once the ball is caught - the ball carrier must stop moving. They can move only to pass the ball to another player. The defenders can close down attackers, working to remove attacking options. Defenders can intercept the ball, but must leave the ball carrier alone once the ball is cause. They can apply pressure on the pass, similar to the pressure that a bastleball player might apply (but consider using this as a progression). Tries can be scored by attackers who catch the ball inside the oppositions in goal area. Dropped balls result in a turn over.

Be brief when telling the players the laws of this game, it's important to get them moving quickly. This is not a contact game, but there will be some light contact. Break your players into two teams, giving each team their own colour of bibs if necessary. One team goes to attack, and one to defence. Nominate a Scrum Half for each team, it will be their job to move the ball from the back of the maul and out to an attacking line. There is no kicking in this game. Normal laws of rugby apply e.g. a forward pass will result in the ball being turned over to the opposition. If an attacking player is touched: they must stop and turn, a maul is then built based on how you have trained your players to Maul. Only four players should be in the maul - but every player should be able to maul - including the backs! When you start playing this game make sure that the defence is employing your defensive pattern around the maul. They will commit 4 players, but will not do anything more than provide light resistance. Once formed the maul can take four steps before moving the ball. If there is a delay in creating the maul, or the quality of the maul is poor - the ball can be turned over. Depending on your goals decide on the number of touches you wish to allow e.g. unlimited is not a bad option as mistakes will be made! If a team has been in possession for a long time, don't forget to turn the ball over to give the opposition a run. Don't hesitate to shape the game to focus on your session goals, and let us and other coaches know what worked for you.

Brief your players, but keep it brief! In each grid there will not be two channels. In each of the two channels there are two players with a tackle bag and two players binding with their back to the runner. The players binding will be leaning/driving against a tackle shield (similar to how they would be during a maul). The shield will provide support and resistance just before and during the runners hit. The first player starts and runs to the player with the tackle bag and makes a tackle before moving on. After the 2nd tackle they runs to bind with the 2 players and drives them across the line, their bind should result in their head between the hips of the two players in front of him and his shoulders in contact with the from two players backsides. The players driving position should be low and the hit proportionate. When the 3 players cross the line, one of the 2 binding players takes over and continues to run up the other channel, with the first running player now binding with the other remaining player and taking up a driving position against the shield. Change players around to ensure that every player has an opportunity to play different roles.

Tracking hit (2 x 10 minutes in split groups) Set up3 different colour cones on the gain line. 2m spacing (set up 3-4 areas with 2 pads)Defender starts in the middle cone. Attacker has a pad. On "GO" the Attacker with the pad runs straight to one of the 3 cones.The coach can shout a colour to direct the Attacker to a certain cone. The Attacker must run straight to it. This drill will test Defender's front on and side on tackles: left and right.

Be brief when telling the players the laws of this game, it's important to get them moving quickly. This is not a contact game. Break your players into two teams, giving each team their own colour of bibs if necessary. One team goes to attack, and one to defense. Nominate a Scrum Half for each team. There is no kicking in this game. Normal laws of rugby apply e.g. a forward pass will result in the ball being turned over to the opposition. If an attacking player is touched: they must go to ground, present the ball, two of their teammates ruck over (staying over the ball), and the Scrum Half moves the ball for the next phase of attack.The defence must commit three players to every ruck, or risk an infringement which will see tem pushed back ten meters. The ball must be moved from the ruck within 5 seconds. Make sure that the defense is employing your defensive pattern around the ruck.  Throughout the game the coach call the point of attack e,g, attack RED ZONE or Zone 2. The coach can also call the scoring zone, Score At Zone Yellow or Zone 3. As the game progresses have the players call the point of attack, and the scoring zones - but they must do this early and they must committ to that attack for a period of time. Have attacking players do what they normally would at the ruck. Depending on your goals decide on the number of touches you wish to allow e.g. unlimited is not a bad option as mistakes will be made! On a mistake or after a period of time, turn the ball over so that both teams get time in attack and defence. Don't hesitate to shape the game to focus on your session goals, and let us and other coaches know what worked for you!

Split the players into two teams, giving each team their own set of bibs. Two different colours that clearly define the teams. Keep your player briefing, brief. It's important that you get your players moving as quickly as possible. Tell the players that we will be playing One Touch Ruck, see the laws surrounding this game in the Warm-Ups section of the SportPlan site. Briefly - when an attacking player is touched while carrying the ball: they go to ground and either pop or present the ball for a minimum of two supporting players to ruck over. The defence should behave as they normally would at the ruck, committing two players who will not compete for the ball or go into contact. The defence should employ their normal patterns around the ruck. The attacking team can have three touches in a row between the 15 meter lines, if they move the ball to the either of the 15 meter channels they can have another four touches in that channel before having to move the ball back out. If the attacking team moves quickly from one 15 meter channel to the other (exploiting space), they get a bonus of 4 touches in that zone. If any attacking team exceeds the number of touches they can sustain inside a channel, the ball is turned over. Play with these laws a bit - keeping an eye on what you want to achieve in this session. The normal laws of rugby apply, any law infringements result in a turn over. There is no kicking in this game. Don't forget to give the defence a turn in attack, if for any reason the attacking team is particularly good at retaining the ball. If they are, well done you as a coach!

Seated on floor, feet touching, knees bent, join hands and pull one another forwards and backwards to loosen up lower back. Same position hands joined, rotate upper body from left to right in an upright seated position to stretch lower back and warm up obliques. Standing, facing one another each both players place 1 hand on the other players' shoulder, swinging legs in a pendulum motion to stretch the hamstrings (<em>see video below</em>). Same position but now swing leg diagonally across to stretch groin and glutes (<em>see video below</em>). Both players do 10 push ups taking at least 5 seconds to complete 1 push up, to warm up and stretch chest and back. Swing the arms in a circular motion to loosen up shoulders and warm up the arms. Pick up one another in a tackling technique and take 2 steps with player on your shoulder, then put down softly and slowly. Make sure to pick up with both legs and shoulders (same leg same shoulder) One player leans forward, the other places his hand on his shoulders, and resists while the player leaning works his way forward using leg power. Back to back, one player resists with the legs and the other pushes, resist 60% so that the player can keep moving forward. 1 vs 1 scrummaging with a max effort of about 50%

Set up a rectangle of cones (10x5) with two gates of cones of a different colour 2m in front of cones on opposite sides of the rectangle (See diagram).Get the players to line up in equal numbers behind the 4 cones of the rectangle (1, 2, 3, 4).The ball starts on the floor between one of the gates of cones, a player approaches from behind a cone (1) and passes the ball off the floor to a player running onto the ball from behind a cone (2). The player who passed the ball continues his run and joins the back of the queue infront of him (4). The receiver catches the ball and continues his run, putting the ball on the ground between the cones in front of him, before joining the back of the queue (3). The player at the front of the queue (3) runs forward, and passes the ball off the floor to a player running onto the ball from behind a cone (4). The player who passed the ball continues his run and joins the back of the queue infront of him (2). The receiver catches the ball and continues his run, putting the ball on the ground between the cones in front of him, before joining the back of the queue (1). The player at the front of the queue (1) runs forwards, and passes the ball off the floor to a player running onto the ball from behind a cone (2), and the drill continues...Change the direction by moving the gates of cones forward to be in front of the opposite cones (4 and 2, instead of 1 and 3)Progressions:Instead of putting the ball on the ground, have to go to ground, present the ball, then get up and out of the way.As a group must complete 10 successful passes before the session can move on, every time a ball is dropped the whole group does an exercise (e.g. 10 press ups).

Make sure your warm-up area is marked out before the players arrive. Depending on the number of players you have at training, mark out several warm-up grids. The size of your grid is a suggestion, but around 10 meters x 10 meters. The bigger the grid, the easier it is for the attackers - they have more space. The smaller the grid, the easier it is for the defenders. Break your players into two groups, pads and passers. One third of your players will be passers; the rest will be on the pads. Have one team quickly demonstrate the game to the other players. In each grid have four players on pads, and two passers. You could have more passers; I'll leave this to your judgment. The job of the players on the pads is to put pressure on the ball carrier, to surround them and stop them from passing the ball. The players on the pads are also trying to force the passers to make mistakes e.g. drop the ball, throw a bad pass etc. The passers have to move the ball around the grid, avoiding the pads. Passers can pass the ball in any direction. Players on the pads should have a little fun, and within reason push the passers around a little. You can award points for each successful pass, and points to the defending team on the pads for every occasion when a ball carrier is surrounded or the ball carriers make a mistake. Don't forget to change the players around, and to give players on the pads a go at passing the ball under pressure. <span style=&quot;text-decoration: underline;&quot;><em>Law Variations:</em> You could insist that passers have only 3 second to make their pass, or risk losing a point to the defending team.

Groups of 6+ Balls Bibs Cones One player with a ball must run around trying to touch the other players without a ball.If tagged the player must stand like a scarecrow still. The other players must try and rescue him by running under his arms or going through his legs. The tagger wins if all other players are stuck.

The aim of the drill is to develop basic high ball catching skills.

&lt;p&gt;• The aim of the drill is to develop reaction catching skills.&lt;/p&gt;

The following are the laws for this game: Normal laws of rugby apply; a knock on etc. results in a turn over. The attacking team gets 8 touches before the ball has to be turned over. Change this to suit your training goals. It would be ok to have unlimited touches, changing the defence and attack after a set period of time. A player is touched only when the defender has made a two handed touch, you can change this to one hand if you wish. Defenders cannot hold the attacker, nor can the attacker use significant force to push through defenders. Defenders who make a touch run to the furthest in goal area and back before being back to re-join the defensive line. You will find that several defenders will be making their way forward and back at any given time. If an attacking player is touched while in posession of the ball: they stop, set the ball down, stand over it, and the scrum half is allowed to move the ball again to restart the attack. The defence must remain onside following a touch. Only when the support player passes the ball out can the defence press up on the attack. If the defence goes offside or operates illegally, the attack gains 10 meters. Don't forget to switch the teams around. Tries only, no conversions - keep the game tempo high. There is no kicking.

Excellent way to develop the different rucking techniques. Works concept of leg drive, body positions in contact, ball placement and desire to get go forward ball. Pad holder roles ball 1st man down and up into contact 2nd man clear 3rd man picks 1st player pumps legs and ends up long and is active on the floor. 2nd man is low and drive beyond the ball. 3rd player stays low and powers away. 2nd man may have to and Leach on. The idea is for them to work on getting going forward. Keep changing handball is taken by the 1st player.