Rugby: attack shape

Drill to practice team shapes or backs moves against a defence with less numbers than the attack.Set up a "ruck" with a scrum half/feeder, 3 defenders on the back foot of the "ruck" and 4 attackers opposite them. The attackers attack the defence, then turn round and attack back the way they have just come. Progressions: Change the set up of the attack, for example a blindside winger or full back in behindChange the number of attack/defenceChange the defensive system (e.g. hammer, blitz, ice, up and out, umbrella)

Lets get the ball and the players moving with lateral passing through the hands. Each training area only needs one ball, and that ball should start with the any of the two players at the very ends of the L. Tell players to move forward, passing the ball down the line. When the ball gets to the last receiver, that player will pass it to the first receiver in the next line that is waiting to go. They should advance right away. Allow the players to simply move the ball down the line.

This is an exercise for continuity and support for attacking play Lay out a rectangular playing area, with four attackers and minimum three defenders The attackers begin in a diamond formation, with the ball carrier at the front The defenders are then stacked in rows, one defender per row, spread out diagonally The ball carrier is tackled by the first man, and offloads to one of the two supporting attackers The receiver of the pass runs and is tackled by the next defender and they offload to one of two supporting attackers As one of the four attackers will be on the floor from a tackle, the next phase will include three attackers, who should be in an arrow formation

Set a narrow grid to attack. Defenders and attackers begin on the touchline in the centre. Both leave at the same time and run around appointed cones, ball carrier should accelerate up towards inside shoulder of defender to draw in and then pass to the support runner coming from depth who can run in and score.

Playing area of 25m in length - adjust width to suit numbers- equal numbers in both teams Full LEG tackles ONLY - ball carrier when tackled can off load immediately or IF no support present when support arrives - game continues until knock or forward pass occurs. When a try is scored the try scorer turns to attack the other try line game continues playing the opposite way. No rucks or mauls.

Be brief when telling the players the laws of this game, it's important to get them moving quickly. This is not a contact game. Break your players into two teams, giving each team their own colour of bibs if necessary. One team goes to attack, and one to defense. Nominate a Scrum Half for each team. There is no kicking in this game. Normal laws of rugby apply e.g. a forward pass will result in the ball being turned over to the opposition. If an attacking player is touched: they must go to ground, present the ball, two of their teammates ruck over (staying over the ball), and the Scrum Half moves the ball for the next phase of attack.The defence must commit three players to every ruck, or risk an infringement which will see tem pushed back ten meters. The ball must be moved from the ruck within 5 seconds. Make sure that the defense is employing your defensive pattern around the ruck.  Throughout the game the coach call the point of attack e,g, attack RED ZONE or Zone 2. The coach can also call the scoring zone, Score At Zone Yellow or Zone 3. As the game progresses have the players call the point of attack, and the scoring zones - but they must do this early and they must committ to that attack for a period of time. Have attacking players do what they normally would at the ruck. Depending on your goals decide on the number of touches you wish to allow e.g. unlimited is not a bad option as mistakes will be made! On a mistake or after a period of time, turn the ball over so that both teams get time in attack and defence. Don't hesitate to shape the game to focus on your session goals, and let us and other coaches know what worked for you!

<div class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>Be brief when telling the players the laws of this game, it's important to get them moving quickly. </div> <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>This is not a contact game. <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>Break your players into two teams, giving each team their own colour of bibs if necessary. <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>One team goes to attack, and one to defence. <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>Nominate a Scrum Half for each team. <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>There is no kicking in this game. <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>Normal laws of rugby apply e.g. a forward pass will result in the ball being turned over to the opposition. <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>If an attacking player is touched: they must go to ground, present the ball, two of their teammates ruck over (staying over the ball), and the Scrum Half moves the ball for the next phase of attack. <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>When you start playing this game make sure that the defence is employing your defensive pattern around the ruck. As the game develops consider telling the defenders that they must have one or more players at the back of the ruck, if they are not fast enough to do this - push them back 10 meters. <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>It’s important that defenders are employing their defensive pattern behind the primary defensive line. <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>Have attacking players do what they normally would at the ruck. <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>Depending on your goals decide on the number of touches you wish to allow e.g. unlimited is not a bad option as mistakes will be made! <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>When you feel the time is appropriate, usually during a ruck, blow you whistle and should FLIP IT – kicking in or throwing in a second ball to the back 3/2 defenders on the team currently in defence OR just kick it behind the defenders. The defensive team goes, without hesitation, into attack. The team that was attacking goes into defence and you or an assistant coach remove the other ball from play when you can. Ideally you might have two balls with different markings. <li class=&quot;&quot;&quot;MsoNormal&quot;&quot;&quot;>Don't hesitate to shape the game to focus on your session goals, and let us and other coaches know what worked for you!

Change the shape of the defenders. Instead of a single line, one behind the other, try 1 then 3 then 1 or 1 2 2.

This is a simple 2 v 1. The two players have to get past the one defender without being touched, that's it. The defender will start 10 meters back, and can move anywhere inside the box. The attack must remain inside the box and all pass msut be legal. Don't forget to change the defender.

One player kicks the ball to the 1 player left at the end of the grid as soon as the kick goes in the air the rest of the kicking team run to support the catcher to play a 5 v 4 against the defence. The defence can not start until the ball is caught.

Be brief when telling the players the laws of this game, it's important to get them moving quickly. This is not a contact game, but there will be some light contact. Break your players into two teams, giving each team their own colour of bibs if necessary. One team goes to attack, and one to defence. Nominate a Scrum Half for each team, it will be their job to move the ball from the back of the maul and out to an attacking line. There is no kicking in this game. Normal laws of rugby apply e.g. a forward pass will result in the ball being turned over to the opposition. If an attacking player is touched: they must stop and turn, a maul is then built based on how you have trained your players to Maul. Only four players should be in the maul - but every player should be able to maul - including the backs! When you start playing this game make sure that the defence is employing your defensive pattern around the maul. They will commit 4 players, but will not do anything more than provide light resistance. Once formed the maul can take four steps before moving the ball. If there is a delay in creating the maul, or the quality of the maul is poor - the ball can be turned over. Depending on your goals decide on the number of touches you wish to allow e.g. unlimited is not a bad option as mistakes will be made! If a team has been in possession for a long time, don't forget to turn the ball over to give the opposition a run. Don't hesitate to shape the game to focus on your session goals, and let us and other coaches know what worked for you.

The following are the laws for this game: Normal laws of rugby apply; a knock on etc. results in a turn over. The attacking team gets 8 touches before the ball has to be turned over. Change this to suit your training goals. It would be ok to have unlimited touches, changing the defence and attack after a set period of time. A player is touched only when the defender has made a two handed touch, you can change this to one hand if you wish. Defenders cannot hold the attacker, nor can the attacker use significant force to push through defenders. Defenders who make a touch run to the furthest in goal area and back before being back to re-join the defensive line. You will find that several defenders will be making their way forward and back at any given time. If an attacking player is touched while in posession of the ball: they stop, set the ball down, stand over it, and the scrum half is allowed to move the ball again to restart the attack. The defence must remain onside following a touch. Only when the support player passes the ball out can the defence press up on the attack. If the defence goes offside or operates illegally, the attack gains 10 meters. Don't forget to switch the teams around. Tries only, no conversions - keep the game tempo high. There is no kicking.

Players should pass in a line on the whistle. The 2 players closest to the ball go out to the line and as soon as they turn the 3 remaining players then attack with the intention of scoring.

The players stood behind the line work the ball up through the channel in groups of 5. As they progress up the area they work the ball left and right. Defenders are placed on cones which have been given a number. As the group work their way up the channel the coach could call <em>1</em>. At this point one player from cone <em>1</em> runs out to defend. If a call of <em>1</em>, <em>2</em> is made then one player from cone <em>1</em> and <em>2</em> come out to defend. A call of <em>2</em>,<em>2</em> means two players from cone 2 come out to defend and so on... The diagram shows a call of <em>4, 1.</em>

10 carried the ball forward, inviting the defence to press up. 11 runs a decoy line. 10 passes to 12. 15 runs a line between 12 and 13, see diagram. 12 miss-passes to 13, skipping 15. 13 runs an over before taking the ball. 14 runs a supporting line for the ball carrier.

Be brief when telling the players the laws of this game, it's important to get them moving quickly. This is not a contact game. Break your players into two teams, giving each team their own colour of bibs if necessary. One team goes to attack, and one to defense. Nominate a Scrum Half for each team. There is no kicking in this game. Normal laws of rugby apply e.g. a forward pass will result in the ball being turned over to the opposition. If an attacking player is touched: they must go to ground, present the ball, two of their teammates ruck over (staying over the ball), and the Scrum Half moves the ball for the next phase of attack. When you start playing this game make sure that the defense is employing your defensive pattern around the ruck. As the game develops consider telling the defenders that they must have one or more players at the back of the ruck, if they are not fast enough to do this - push them back 10 meters. Have attacking players do what they normally would at the ruck. Depending on your goals decide on the number of touches you wish to allow e.g. unlimited is not a bad option as mistakes will be made! Don't hesitate to shape the game to focus on your session goals, and let us and other coaches know what worked for you!

See the diagram for suggested starting positions. 10 carries the ball up. 12 advances. 10 passes to 12. 12 cuts in. 13 advances and cuts in towards the 12. 13 takes from 12 on a switch. 15, and 14 provide support. 13 straightens after taking the ball on an angle.

Be brief when telling the players the laws of this game, it's important to get them moving quickly. This is not a contact game. Break your players into two teams, giving each team their own colour of bibs if necessary. One team goes to attack, and one to defense. There is no kicking in this game. Normal laws of rugby apply e.g. a forward pass will result in the ball being turned over to the opposition. If an attacking player is touched: they must pass the ball right away, the type of touch were playing is based on one touch off-load, but you can use any touch variation that works best with respect to your training goals. When the coach shouts DEFENCE DOWN - every defensive player must do 1/2/3 press ups (you choose the number). The attack can continue while the defence is down. When you start playing this game make sure that the defense is employing your defensive pattern. If the defence infringes with respect to the law or they are not fast enough to get onside - push them back 10 meters. Depending on your goals decide on the number of touches you wish to allow e.g. unlimited is not a bad option as mistakes will be made! When there is a mistake - turn the ball over. Don't hesitate to shape the game to focus on your session goals, and let us and other coaches know what worked for you!

Attackers react to the defensive line in a 3 v 2 situationIf defence is compressed - overs - an outside line should be exploited. Can use two or three attackers to attack into the wide spaceIf defence is wide - unders - a tight inside line should be hit by the middle player into the gap between two defenders.

This drill coaches players the lines they should run when receiving the ball in order to maximise the chance of them breaking the gain line.<li dir=&quot;ltr&quot;>Use a tackle bag to simulate where the ruck and offside line would be.<li dir=&quot;ltr&quot;>The players line up as if they were going to come &quot;around the corner&quot; to receive the ball.<li dir=&quot;ltr&quot;>Players should run an L shaped running line to get across the first defender and then footwork to get through the second defender.Progression (0.49) - Add an extra pass to the drill<li dir=&quot;ltr&quot;>For the first receiver the drill is exactly the same in terms of the running line.<li dir=&quot;ltr&quot;>Then there is a second player on his outside shoulder who uses the same running line to beat the second defender.<li dir=&quot;ltr&quot;>The first receiver has a choice (1.19) - whether to go through the gain line and pass or pass before he gets to the gainline.What is the gain line?The gain line is an imaginary line in rugby parallel to the halfway line that is the back foot of the breakdown or the defences offsideline.